LA2 Spray Gun

As the core of supersonic flame spraying equipment, HA-2000 supersonic flame spraying system is matched with LA2 series propane air supersonic flame spray gun, this series of spray guns adopts the latest international supersonic spray gun design and structure innovation and optimization, the spray gun is the most stable and reliable universal air supersonic flame spray gun, the spray gun is in use, only propane or propylene as fuel, high safety.Customers can also choose to add hydrogen for use, when hydrogen is not used, the parameters of the hydrogen parameter bar in the parameter setting interface are set to 0 value, when hydrogen needs to be used, the starting value, running value, duration and ramp parameters of the hydrogen parameter bar can be set in the parameter setting interface, and the hydrogen flow rate will automatically ramp up to the operating value when the equipment starts.  Powder deposition rate can be increased. In addition, the gun can also be used as a pre-treatment blasting of the workpiece.

The main structure of the LA2 spray gun is the way in which the combustion chamber is connected to the first-stage combustion nozzle, and part of the air is used to support combustion, and part of it is used to cool the gun body and directly discharge it out of the gun, because the flame gas after combustion instantly expands several times, and the inside of the gun body has a stronger impetus for the powder particles, so that the flight speed of the particles is higher, and the coating presents excellent characteristics, such as low porosity and higher coating hardness.

Pictured: LA2 supersonic flame spray system gun

LA2 supersonic flame spray gun (optional) specifications

1.Machinery manufacturing: Used for automobiles, industrial pumps and other parts, such as crankshafts and impellers, to repair wear, strengthen the surface, and improve wear resistance and reliability.

2.Petrochemical industry: Processing pipelines, reactors, etc., to prevent medium corrosion and erosion, and ensure the life and safety of offshore platform facilities.

3.Power energy: Thermal power, hydropower, wind power equipment such as boiler tubes, steam turbine blades, sprayed to resist high temperature, wear, reduce accidents.

4.Aerospace: Spraying key components such as engine blades and landing gear, which is resistant to high temperature and corrosion to ensure flight safety.

5.Mold manufacturing: All kinds of molds such as injection molding, die-casting molds, long life after surface spraying, good molding, easy demoulding.

6.Medical devices: Used in artificial joints and surgical instruments to improve biocompatibility and safety, and promote the integration of bone tissue.

7.Building materials: Anti-corrosion for bridges and steel structures, and also used for stone and ceramics to enhance waterproof, anti-fouling and wear-resistant properties.

Product Operate Guide    

1. Check the equipment: Before use, carefully check whether the parts of the spray gun are in good condition, whether the connection is tight, whether there are any leaks and other problems. Make sure that the nozzle, air cap and other parts of the spray gun are clean and free of clogging or damage.

2. Wear protective equipment: Operators should wear protective masks, goggles, gloves and other personal protective equipment to prevent spraying materials from causing harm to the body

3. Timely cleaning: After use, the spray gun should be cleaned immediately. Disassemble the paint cup, nozzle and other parts of the spray gun, clean them with the corresponding solvent to remove the residual paint and prevent the paint from curing and clogging the spray gun.

4. Regular maintenance: Regularly inspect all parts of the spray gun, such as nozzles, air caps, needle plugs, etc., and replace them in time if they are worn or damaged. At the same time, the moving parts of the gun are lubricated to keep it in good working condition.

Q1: How efficient is the LA2 gun?

A: Zhengzhou Lijia LA2 spray gun has a high spraying efficiency, its flame flow speed can reach more than 2000m/s, and the powder feeding method can make the powder better dissolved and evenly distributed, which can effectively improve the coverage efficiency, compared with some similar spray guns, more spraying work can be completed in the same time.

Q2: What is the standard of coating quality for this spray gun?

A: The LA2 gun delivers a coating with a high bond strength and a porosity of less than 1%, which is well suited to meet the coating quality requirements of various industrial applications, whether in terms of wear resistance, corrosion resistance or other properties. 

Q3: What materials can be sprayed with the LA2 gun?

A: The LA2 spray gun can spray a wide range of materials, including copper powder, aluminum powder, iron-based powder, nickel-based powder, tungsten carbide powder, superviscous powder, ultra-fine powder and other low-temperature, medium-temperature and high-temperature materials, which can basically meet a variety of different industrial spraying needs. 

Q4: Is the LA2 gun difficult to maintain? What do I need to pay attention to?

A: Maintenance is not complicated. After use, the paint cup, nozzle and other parts of the spray gun should be cleaned with the corresponding solvent in time to prevent the paint residue from curing and clogging the spray gun. Regularly inspect all parts of the spray gun, such as nozzles, air caps, needle plugs, etc., and replace them in time if they are worn or damaged, and lubricate the moving parts.