Wear resistant coating for spiral shaft-Zhengzhou Lijia Thermal Spray Machinery Co,. Ltd

Wear resistant coating for spiral shaft

Supersonic flame spraying flame flow (1100 m/s) speed, spray particle impact energy, powder oxidation and burning loss is small, can obtain high density, high bonding strength

Send Email Inquiry Now

Introduce

Name: Lithium spiral shaft tungsten carbide spraying

Spraying technology: tungsten carbide spraying

Product Description: Supersonic flame spraying flame flow (1100 m/s) speed, spray particle impact energy, powder oxidation and burning loss is small, can obtain high density, high bonding strength,

The types of coating are as follows: The coating with high density, high bonding strength and excellent comprehensive performance can be obtained by supersonic flame spraying with the flame flow velocity (1100 m/s), high impact energy of jet particles and small oxidation and burning loss of powder.

Bonding strength: ≥ 80 mpa

Porosity: ≤1%

Coating thickness: 0.1-0.3mm

Roughness of raw surface: RA3.2-6.3

12CO-WC HV1400 high hardness 17CO-WC HV1200 high toughness Excellent oxidation resistance of 10CO-4CR-WC HV1300

Tungsten carbide spraying application: Ribbon mixer, high speed mixer, twisted dragon, blades of screw shaft, roots blower, blade, lithium electric equipment, the anode materials equipment, dual planetary mixer furnace equipment, roller kiln, crusher, ball mill, packaging equipment, transportation equipment, mixer, scattered disk, shaft, roller, fan turbine blades, the steam turbine blade, drawing cone, valve plate, chemical tank.

Send us a message

related products

Abrasion resistant coating for shaker

With the development of domestic environmental protection industry in recent years, the new energy industry has made great progress.

Wear-resistant coating for paper dryer

Dryer is an important part of a paper-making machinery and equipment, drying internal needs through 120 ℃ steam, direct contact with the outside surface corrosive medium in the pulp can lead to serious corrosion on the surface of the cylinder

Coating for water turbine runner

The operation stability of hydroturbine generator is related to the efficiency and economic benefit of hydropower station. When the runner of Francis turbine runs normally, fatigue fracture or crack will occur on the runner blade due to water conservancy factors, which makes maintenance difficult, and the maintenance period is long and the process is tedious. Therefore, the failure of turbine runner blade has a very profound impact on the operation of generator set.

Coating of graphite boat bearing plate

A graphite boat is a graphite mold. The graphite die itself is a carrier, we can put the raw materials and parts we need to position or finalize the design together in the graphite die and sintered at high temperature. Graphite mold is made of artificial graphite by mechanical processing. So graphite mold sometimes become graphite boat, also known as graphite ship.

Thermal barrier coating

With the development of aviation, aerospace and civil technology, the use temperature of hot end components is more and more high, has reached the limit of superalloy and single crystal materials. Taking the heating parts of fuel turbine such as nozzle

Abrasion resistant coatings for gas turbines

In order to obtain higher energy efficiency and greater thrust, and heavy duty gas turbine engine turbine inlet temperature is as high as 1600 degrees above, only on the improvement of the performance of the materials and the improvement of structure design, has been unable to meet the rapid development of aviation engine and gas turbine industry needs

Products